Home > CNC Tooling >

CNC OMA Finger Bit Green 8 Segment 20mm x 40mm
CNC Finger Bit, Quartz CNC Finger Bit, Quartzite CNC Finger Bit, Granite CNC Finger Bit Part #XT-XTBIT3HS8
 
Alternative Views:


Distributors With Direct Website Links

Weha has distributors across the USA. Please email us at [email protected] with your company name and zip code. We will put you in contact with the distributor nearest you. You may call as well: 704-940-0115 for assistance. Or, you can find this product online at the above distributor websites:

Weha Price: $120.00

Charlotte, NC Stock Status:In Stock

Part Number: XT-XTBIT3HS8
Qty:

DESCRIPTION
 
OMA CNC Finger Bit Green 8 Segment 20mm x 40mm for Granite, Quartz, Quartzite, Marble

The OMA CNC Finger Bit is a modified 8 segment cnc fingerbit for quartzite, granite, marble, quartz, engineered stone.

The OMA CNC Finger Bit is designed to run between 14-25" per minute between 5,500-8000 rpm, depending on the stone being used.

The life will be excellent, the wear will be even, and the bit will provide an all around, well performing finger bit on practically all stone that is run through the cnc.

Estimated life of the OMA CNC Finger Bit is outstanding. Running a mixture of quartz, granite, quartzite, marble, etc, you can expect between 100-130 sink cut outs when run at the below specifications.

Typical life is a between 550-750 Linear feet, with some bits lasting well over 1000 linear feet, depending on the rpm, feed rate, and materials

OMA CNC Finger Bit Specifications for Quartzite:

Feed rate: 12-16" per minute
RPM: 7000-8500

OMA CNC Finger Bit Specifications for Quartz:

Feed rate: 15"-24" per minute

RPM: 7000-8500

OMA CNC Finger Bit Specifications for Granite:
Feed rate: 15"-24" per minute
RPM: 7000-8500

The photo below is of an OMA CNC Finger Bit that has cut out 98 sinks in a mixture of stone. There is still plenty of life left. Also notice the even wear.

Another fabricator was able to achieve 130 sink cut outs. 40% quartz, 30% granite, 25% quartzite, and 5% marble mix. He ran it at 7000 rpm with 15" per minute feed rate.

With the OMA CNC Finger Bit cost at $99.00, that averaged only $0.76 per cut out.

With the 8 double segments, made in Italy, really long life, very little apple coring, and can run as fast as you want, the OMA CNC Finger Bit is one of the best cnc finger bits that you can put on your cnc for granite, quartz, and quartzite stone.

OMA CNC Finger Bit
OMA CNC Finger Bit 8 segment

Rate this product. Be the first to write a review »