Weha Hook & Loop backed edge wheels are built and designed specifically for horizontal machines such as Comandulli machines, Montresor edge polishers as well as vertical polishing machines: Sasso Flying Flat, Park Industries FastBack, GMM Tower, Marmo 711, and other polishing machines.

Designed to accommodate between 5-9 heads, the Weha inline polishing combo system will create a fantastic polish on marble, granite, dark quartz, light quartz, quartzite, porcelian, ceramic, sintered stone, etc.

The Weha inline polishing wheels are hook & loop backed for quick replacement without the hassle of removing the snail lock holders.

The Step 0 is not needed under normal circumstances. Only use #0 if the edge is not flat or extremely rough and needs some stock removal before step 1.

This Weha combo system took several months of R & D and has been tested on 5 head vertical machines as well on up to 8 head horizontal machines.

The combination of the 3 Step and Donkey pads is producing an excellent polish on all materials with all machines.

for 5 head machines:

Step 1,2,3, Donkey Pad 1000,2000 or 2000,3000 depending on the stone and how much gloss you need to match.

Typical quartz use 1,2,3, Donkey Pad 1000,2000

For greater texture use Step 1,2,3 Donkey pad 600,1000

For 6 or more head machines the sequence can be the same as the 5 head sequence. You may add the 3000 grit Donkey for the occasional very difficult granite.

Machine Specs:

Step 1: 3 Bar

Step 2-6: 2.5 Bar

Feedrate: 120-250cm (48"-100"+) per minute depending on machineand color of stone.